Digital Multimeter Fluke 101
The Fluke 101 may be a basic pocket type Digital Multimeter for day to day use as well as for basic checking. This is often used for measuring volts, resistance, and continuity.
It also can measure capacitance and frequency, but they do not measure amps or milliamps ranges. It’s good for littl electricians.
It is a very small Digital multimeter, it can adjust during a small pocket very easily. So it’s very easy to hold or handle. It’s a light-weight Multimeter.
Fluke 101 Key Features
- Count: 6000
- AVG responding, Capacitor: 100.0 μF
- Voltage: DC: 600 volts; AC: 600 volts; DC Accuracy: ± 0.5% + 3 digit; AC Accuracy: ± 1% + 3 digit
- Resistance: 40 M ohm; Resistance Accuracy: ± 1.5% + 3 digit
- Capacitance: 100 μF
- CAT III 600 volts safety rated
- AC/DC voltage, resistance, capacitance, frequency measurement
Fluke 101 specifications
Apart from the limited ranges, it’s an auto-ranging multimeter on both AC and DC volts, also as resistance, frequency, and duty cycle.
This is a category III-rated multimeter, which makes it good for testing load-side single-phase and three-phase installations.
|DC Voltage||0-600 V|
|AC Voltage Range||600mV to 600 V|
|AC Voltage Accuracy||+/- 3.0%+3 Digits|
|DC Voltage Accuracy||+/- 1.5%+3 Digits|
It is a rock bottom multimeter. Accessories like Tl-75 have accompanied this multimeter and therefore the better part is that the accessory cost is nearly adequate to the multimeter.
Structure / Standard
This DMM is available for the Chinese, US as well as for world markets, with instructions in English and Chinese. Fluke made this multimeter in china to keep costs down. This DMM is out there for the Chinese, US as well as for world markets, with instructions in English and Chinese. Fluke made this multimeter in china to stay costs down.
Interface: The Fluke 101 screen is clean. it’s a 6000-count resolution display. There’s no backlight, however, although the screen displays all relevant icons, including a coffee battery indicator. The dial selector is uncluttered and straightforward to follow, with AC volts, DC volts, AC millivolts, resistance, capacitance, and frequency all clearly labeled.
Useful and Fulfillment
The dial has seven positions, with only resistance and frequency sharing ranges – continuity/diode check is typically on the resistance (Ω) range and duty cycle the frequency (Hz) range. The 101 also features a few buttons – a yellow ‘select’ button, to change ranges, and a Hold button, to manually lock during a reading.
The jack sockets are on the rock bottom of the case – COM (common/black) and therefore the main (red) terminal. Since the Fluke 101 doesn’t have a kickstand, it cannot sit on a bench on its bottom, so this is often not a drag. The optional extra magnetic stand lifts it off the bench and there’s also the choice of hanging it up.
NOTE: There are just the 2 jack sockets on this meter because it doesn’t have current-measuring capabilities.
There’s an auto power-off function, which knocks the multimeter off after 20 minutes of non-use. This will be disabled by holding down the yellow button while turning the unit on.
Overall, it performs tolerably for its stature and is sort of accurate. Readings take longer to stabilize than their average testers, which is to be expected, and therefore the continuity beeper may be a bit off the pace. Battery life is around 200 hours.
Protection and Safety
The Fluke 101 review of this pocket meter includes a glance at its construction. It’s solid and as rugged as others within the 100 series, with a simple to grip body that’s partially enclosed during a trademark integrated rubber holster. Electrically, it’s un-fused, but it easily handles transient kilovolt spikes, unlike most other multimeters during this class.
Fluke 101 Pros and Cons
- Light and little
- Good quality
- Reliable and quite accurate
- Costly test leads
- Tests most ranges
- Voltage input ranges
- Capacitance range
- Frequency range
- Hold function
- No Backlight Display
- Auto-ranging and continuity is slow
- Test Lead connects at heart of the meter
With the Fluke 101 Pocket type Digital Multimeter review, we discovered that this tester is a component of the 100 series from this top multimeter manufacturer. It’s the littlest and lightest meter from them but in contrast the foremost hard-wearing pocket DMM on the market. Although touted as being fit the pocket, it’s quite bulky compared with others therein category.
Good for tradesmen as well as for amateurs, the 101 measures most ranges quite accurately and may handle transient spikes where others often fail. There’s no backlight on the display and reaction time isn’t the timeliest, however, but you can’t have it all for around 2200.